|The T-Ceptor series is the latest addition to our range of thermal rifle scopes, designed for the UK markets smaller target species, encountered at extended ranges and surpasses our WT1 75-3.
Not only is it designed for the UK market, but it is built by us in house right here in the UK. Lead time for manufacture is around 1 week.
The T-Ceptor is the most sensitive thermal rifle scope available with it's new VOx thermal module with 6 memory zero presets for different rifles / ammunition. Adjustable digital zoom range. Increased thermal pallet range. Black / White and automatic selections for reticule colours. Also with it's 75mm lens it also has the highest resolution in a practical, compact lighweight package.
Several reticules are available including one in the first focal plane that can be set as a mil-dot for consistent hold or measuring points at any magnification.
The thermal core is adjustable for background / foreground compensation or manual gain modes. Adjustable for contrast (gain), image brightness (level) with separate brightness adjustment of the display. There is also additional adjustment for image sharpness and noise reduction. In use we have found the image essentially noise free on even lowest noise reduction settings.
The scopes are built around the latest 17 micron VOx shutterless thermal cores in 384x288 and 640x480 resolutions for increased magnification and better image quality. Being shutterless, the image does not deteriorate when in use and requires no calibration.
The fast F1.0 75mm internal focus system objective lenses provide maximum thermal sensitivity and accuracy from what is already the most sensitive core available by some margin. In use this means more detail in your target and better perfromance in poor conditions such as thick fog and rain.
1024x768 OLED display provides the best output image possible with wide range dioptre adjustment.
White / Black hot polarity, plus colour thermal palettes to suit all situations.
Powered by 2 x 16340/RCR123A re-chargeable or CR123A batteries with a continuous run time of 5 hours. Fast power on (<3 seconds) further increases battery life. An accessory battery pack / DVR (BP-2R) is availabel to further increase run-time to 16 hours.
M1913 Picatinny rail mounting interface to mount the scope to the rifle, plus accessory rails on either side of the scope for mounting a DVR / battery pack. Alternatively a MAK mount adapter is available. The standard mount is designed with plenty of reach-forward to fit bolt action rifles without the need for extended rails. The mount interface to the scope is also adjustable for windage and elevation for a prefect bore-sight to centre the reticule.
High optical magnifications and the ability to increase magnification via digital zoom make the T-Ceptor scopes extremely versatile.
Sensor:VOx, 384×288, 17µm, 8…14µм, 50 Hz, <40 mK
Magnification:5-20x with base magnification adjustable to any value
Digital zoom:In steps 2x & 4x base magnification
Power:2xCR123 (5 Hours) or external (BP-2R 16 Hours)
Supplied in soft case complete with batteries and user manual.
Warranty: 2 Years.